(800) 317-5526

Power Semiconductors, Testing Equipment and Refurbishing of Heat Sink Assemblies.

Home Test Equipment Thyristors Assemblies Testing & Engineering
Contact Us Cross reference Diodes / Rectifiers Power Modules Part Number List




Designed for High Voltage Rectifier Diodes, SCRs/Thyristors, and Power Modules (including IGBTs and Darlington Transistors)


Operates on 110/220/240 VAC, 50/60 Hz


Water and shock proof case


LPC M3K Semiconductor Tester                                LPC M3K Tester.jpg (13313 bytes)

Click on pictures to enlarge


* Components are tested for forward and reverse leakage current at voltages up to 3000V.


Marginal components are easily identified during scheduled service, translating into less un-scheduled down-time.
* Gate Voltage/Current to trigger is tested and displayed on the panel meters. 


Identify and replace only marginal or bad components, which means a dramatic reduction in component costs.
* Short current limited to 20mA for operator safety.


Test components before they are being installed to make sure they are functional, and to get a baseline measurement for future reference.
* Tests components according to JEDEC JC-22 and EIA RS-397 test standards
* Oscilloscope output provides the ability to observe the Voltage/Current curve on a X-Y oscilloscope.


Perform receiving inspection to make sure components meet the specifications

Download M3K User Guide Here    Download M3K Brochure Here

Get Adobe Acrobat Reader here

Power Diodes